Catalogue Page - Tiles

 Our Company Logo
Home Page
Panel Catalogue
Cornice Catalogue
Centrepiece Catalogue
Miscellaneous Catalogue
Dimensions, particularly imperial are approximate, for guidance only.       Use them with caution.
These tiles can be applied to walls, ceilings, in panels and square columns.       Please do apply imagination and verve to any scheme for your restaurant, commercial premises or home.
Some of these can look very, very different if installed at 45 degree to baseline.       And it could make YOU look very "arty" or imaginative!       Go on - just consider it.


[Tile Nr. 900]

Tile Nr. 900     "Panels"


  • This tile is approximately 599mm. square and it is particularly suitable for cladding rectangular or square columns.

    This tile can also be cut to approximately 300mm. units, for instance approximately 300mm x 600mm, in either direction.


  • Don't mix different tile designs without first consulting Ossett Mouldings Ltd., the tile manufacturers.


  • This tile is on display at our showroom - please visit and ask to see it.


  • Projection / thickness is approximately 20mm, but please check first.


  • This design (and most others) have locking / "peg" edges.       Possibly the correct word is "tegular" - but I'm truthfully uncertain.

  • Please believe me, this tile does actually look much better than this illustration.       I will replace it with a more suitable / truthful one when time allows.       Please come and see it.





    • [Tile Nr.901]

    Tile Nr. 901     "Spiral"


  • Projection approximately 20mm, (to check) 1.0 inch.
    • As with tile 900 above, this one is also suitable for rectangular columns, but it will require mitring or an angle fillet, please ask for our advice, we will happily give it.

  • This tile is approximately 595mm. square.


  • You cannot easily "jumble" designs together - please ask our advice if considering this.


  • This tile can be examined at our showroom - please ask to view it.


  • Also, I like this one - a lot!





    • [Tile Nr. 902]

    Tile Nr. 902     "Cloth Board"



  • Thickness approximately 20mm, awaiting checking.


  • This tile is approximately 597mm. square.
    • This tile can also be "divided" in either direction.       The central rectangular panels are suitable to receive a logo, a personal or corporate symbol or name.



  • Please don't "jumble" designs together in same grid without consulting Ossett Mouldings Limited.







    • [ Tile Nr. 916 ]

    Tile Nr. 916       "Azteka"



  • Approximately 30mm thick (thickness varies)




  • An "Aztec / Mexican" themed, highly raised pattern faced tile




  • This tile is made to - and easily mixes with tile design Nr. 915 below.       That is simply a matching plain tile with a "sandy" face.



  • Both tiles are approximately 500mm. square.


  • If you're thinking about using this in a very busy / high traffic place.       For instance a bar front TOP LIGHT IT?   BRILLIANT IDEA!
    Remember all these tiles can be made in harder materials.






    • [Tile Nr. 905]

    Tile Nr. 905



  • Approximately 20mm. thick, but check with Ossett Mouldings Ltd. first.


  • This tile is approximately 598mm square.


  • Please don't mix tile designs together "willy nilly".







    • [Tile Nr. 906]

    Tile Nr. 906



  • Tile is approximately 20mm thick.


  • Tile is 600mm. square (approximately).


  • It is possible to mix SOME designs together - but ask first.







    • [Tile Nr. 907]

    Tile Nr. 907



  • This tile is approximately 20mm. thick.


  • This tile is 601mm. square - approximately.


  • Please don't mix designs together without careful consideration.







    • [Tile Nr. 908]

    Tile Nr. 908



  • Tile is approximately 20mm. thick.


  • Tile is approximately 602mm. square


  • Please don't mix these designs together lightly


  • This one is also suitable for random or repetetive logos / similar designs.       Paint, stencil or transfer applied.





    • [ Tile Nr. 909]

    Tile Nr. 909



  • Tile is about 20mm. thick


  • Tile is about 602mm. square.


  • Designs don't easily mix


  • I really don't like this design.       To be honest - it is horrible.       But if you like it I will be happy to sell it to you!       Well, not happy really, in fact if you have so little taste or sense of design why are you on Ossett Mouldings site?





    • [ Tile Nr. 910]

    Tile Nr. 910



  • Tile is approximately 20mm thick


  • Approximately 595mm. square


  • Please think before you mix designs up







    • [Tile Nr. 911]

    Tile Nr. 911



  • Approximately 20mm thick


  • Approximately xxxmm. square.       We will obtain this dimension as soon as possible.


  • Please don't jumble these c.600mm tile designs up without consulting Ossett Mouldings Limited - the tile manufacturers.







    • [tile Nr. 913]

    Tile Nr. 913



  • Approximately 20mm thick


  • Approximately 400mm square


  • This is the only tile of this dimension we make.







    • [Tile Nr. 915]

    Tile Nr. 915 "Azteka"



  • Approximately 20mm thick


  • A "stone / stippled" faced tile


  • Tile is aproximately 500mm. square


  • This tile is made to and can easily be mixed with Tile Nr. 916 - above.





    • To Top of this page.





    Ossett Mouldings Limited,
    "The Old Forge", Owl Lane, Shaw Cross, DEWSBURY, West Yorkshire, United Kingdom, WF12 7RQ

    Tel;-     +44 (0)1924 463488

    Fax;-   +44 (0)1924 455811

    Email;- ossettmouldings.com

    How to find us;-   Map   to Showroom, Workshops and Car Parking.